Tuesday, August 21, 2012
Awesome
*Click the tag for full view*
This tutorial was written by Brunette on August 21st 2012.
Any similarity to any other tutorial is purely coincidental.
Do not copy and paste my tutorials or claim as your own you may link to them for group challenges.
What you'll need:
You'll need a tube of choice I am using an awesome tube by Ed Mironiuk which you can purchase at Creative Design Outlet HERE.
This tutorial was written by Brunette on August 21st 2012.
Any similarity to any other tutorial is purely coincidental.
Do not copy and paste my tutorials or claim as your own you may link to them for group challenges.
What you'll need:
You'll need a tube of choice I am using an awesome tube by Ed Mironiuk which you can purchase at Creative Design Outlet HERE.
Be sure to check out ALL the other great artists while you're there!
A gorgeous kit by Alika's Scraps called Awesome Sauce which you can purchase at O'Scrap Candy Shack HERE.
A gorgeous kit by Alika's Scraps called Awesome Sauce which you can purchase at O'Scrap Candy Shack HERE.
Be sure to check out all her other fab kits as well as other designers while you're there!
Mask of choice - mine is from weescottlass creations which you can find HERE.
I used mask number 218 :) you'll see on the right side they are bundled in bulk downloads :)
Make sure you leave some love when you download!
Fonts of choice - I am using a pixel font for the copyright and Calvin and Hobbes for the name.
Ready?
Let's get started!
Open up a 700x700 canvas we can always re-size/crop later.
I like my tags BIG LOL.
Open up element 37 from the kit which is a frame copy and paste it as a new layer onto your canvas re-size it so it fits nicely.
Now add a new layer and flood fill with white then apply your mask and merge group re-size it a little if you think its too big. Now make a foreground/background gradient with colors from your tube and add a new layer flood fill it with the gradient and apply your mask again and merge group. IF you re-size the white masked layer then you need to re-size this masked layer as well, I did the white layer just to make it stand out a bit more. Move these layers below the frame.
Now if your tube came with a close up great if not just use the regular tube copy and paste it as a new layer under the frame layer but above the mask layers, use your eraser tool to remove what over hangs outside the frame. Duplicate and mirror and merge down. Duplicate and change the blend mode to soft light and the bottom layer change the blend mode to screen.
Open up element 3 from the kit copy and paste it as a new layer this should be above your tubes in the frame re-size so it fits nicely duplicate and mirror. Use your eraser tool to erase what overhangs the frame. Merge these layers together and change the blend mode to overlay.
Copy and paste your main tube as a new layer above your frame of course duplicate it and go to adjust-blur-gaussian blur set to 3 then change the blend mode to soft light and lower the opacity to 18 or whatever you think looks best. Add a drop shadow.
Here are my settings
H 2
V 2
Opacity 60
Blur 4.00
Color Black
Now we can decorate your tag a bit YAY!
I used element 16 from the kit which is a cute lil bow with a skull on it copy and paste it as a new layer onto your canvas re-size it so it fits nicely and arrange it near the top right of your frame.
Open up element 36 from the kit which is a cup cake copy and paste it as a new layer re-size it so it fits nicely and move it to the bottom left of the tube.
Using element 6 from the kit which is a cute lil emo stuffed toy copy and paste it as a new layer re-size it so it fits nicely and move it to the bottom right of the tube.
Now using element 29 copy and paste it as a new layer below everything except your mask layers re-size it so it fits nicely. Duplicate and mirror it until its all over your canvas.
Go through and add a drop shadow to your frame, cupcake, bow, stuffed toy.
Add your name in your font and color of choice then go to selections-select all-float-defloat-modify and expand by 2 add a new layer flood fill it with white or a color of choice (I used a foreground/background gradient) then add some noise by going to adjust-add/remove noise-add noise random checked, 36% noise and monochrome checked. DO NOT deslect yet go to modify and expand by 2 again add a new layer and flood fill with the color you used for your name move it below all the name layers and add a drop shadow. Same drop shadow settings as above.
Finally add your copyright and license number if applicable save as png or jpeg whichever you prefer and we're done!
I hope you enjoyed this tutorial and found it easy to follow.
I would LOVE to see your results to any tutorials that you do, you can email results to me or post them on my page on face-book if you have a face-book account.
Mask of choice - mine is from weescottlass creations which you can find HERE.
I used mask number 218 :) you'll see on the right side they are bundled in bulk downloads :)
Make sure you leave some love when you download!
Fonts of choice - I am using a pixel font for the copyright and Calvin and Hobbes for the name.
Ready?
Let's get started!
Open up a 700x700 canvas we can always re-size/crop later.
I like my tags BIG LOL.
Open up element 37 from the kit which is a frame copy and paste it as a new layer onto your canvas re-size it so it fits nicely.
Now add a new layer and flood fill with white then apply your mask and merge group re-size it a little if you think its too big. Now make a foreground/background gradient with colors from your tube and add a new layer flood fill it with the gradient and apply your mask again and merge group. IF you re-size the white masked layer then you need to re-size this masked layer as well, I did the white layer just to make it stand out a bit more. Move these layers below the frame.
Now if your tube came with a close up great if not just use the regular tube copy and paste it as a new layer under the frame layer but above the mask layers, use your eraser tool to remove what over hangs outside the frame. Duplicate and mirror and merge down. Duplicate and change the blend mode to soft light and the bottom layer change the blend mode to screen.
Open up element 3 from the kit copy and paste it as a new layer this should be above your tubes in the frame re-size so it fits nicely duplicate and mirror. Use your eraser tool to erase what overhangs the frame. Merge these layers together and change the blend mode to overlay.
Copy and paste your main tube as a new layer above your frame of course duplicate it and go to adjust-blur-gaussian blur set to 3 then change the blend mode to soft light and lower the opacity to 18 or whatever you think looks best. Add a drop shadow.
Here are my settings
H 2
V 2
Opacity 60
Blur 4.00
Color Black
Now we can decorate your tag a bit YAY!
I used element 16 from the kit which is a cute lil bow with a skull on it copy and paste it as a new layer onto your canvas re-size it so it fits nicely and arrange it near the top right of your frame.
Open up element 36 from the kit which is a cup cake copy and paste it as a new layer re-size it so it fits nicely and move it to the bottom left of the tube.
Using element 6 from the kit which is a cute lil emo stuffed toy copy and paste it as a new layer re-size it so it fits nicely and move it to the bottom right of the tube.
Now using element 29 copy and paste it as a new layer below everything except your mask layers re-size it so it fits nicely. Duplicate and mirror it until its all over your canvas.
Go through and add a drop shadow to your frame, cupcake, bow, stuffed toy.
Add your name in your font and color of choice then go to selections-select all-float-defloat-modify and expand by 2 add a new layer flood fill it with white or a color of choice (I used a foreground/background gradient) then add some noise by going to adjust-add/remove noise-add noise random checked, 36% noise and monochrome checked. DO NOT deslect yet go to modify and expand by 2 again add a new layer and flood fill with the color you used for your name move it below all the name layers and add a drop shadow. Same drop shadow settings as above.
Finally add your copyright and license number if applicable save as png or jpeg whichever you prefer and we're done!
I hope you enjoyed this tutorial and found it easy to follow.
I would LOVE to see your results to any tutorials that you do, you can email results to me or post them on my page on face-book if you have a face-book account.
Sweet Cupcake
*Click the tag for full view*
This tutorial was written by Brunette on August 21st 2012.
Any similarity to any other tutorial is purely coincidental.
Do not copy and paste my tutorials or claim as your own you may link to them for group challenges.
What you'll need:
You'll need a tube of choice I am using a gorgeous tube by Wendy Gerber.
A gorgeous kit by GrnIz Dezinez called My Sweet Cupcake. Which you can purchase HERE as a collab with the tubes by Wendy Gerber or HERE alone as just the kit.
Mask of choice - mine is by Tonya from Creative Misfits HERE.
I used mask number 2 :)
Make sure you leave some love when you download!
Fonts of choice - I am using a pixel font for the copyright and A&S Black Swan for the name.
Ready?
Let's get started!
Open up a 700x700 canvas we can always re-size/crop later.
I like my tags BIG LOL.
Open up ribbon frame two from the kit copy and paste it as a new layer onto you canvas re-size it so it fits nicely. Now take your magic wand and click inside the frame and go to selections-modify-expand by 3 now open up a paper of choice I used paper 9 copy and paste it as a new layer then go to selections-invert and hit delete. DO NOT deslect it yet. Open up your tube preferably a close up copy and paste it as a new layer and arrange it to your liking then hit delete. Open up another paper I used paper 2 from the kit copy and paste this as a new layer re-size and arrange to your liking then hit delete. Now you can deselect. Leave the bottom paper as it is change the blend mode of your tube layer to screen and duplicate it. Then change the blend mode of the top paper layer to screen.
Now we're gonna have some fun with the elements from the kit! YAY!
Open up the LOVE word-art element copy and paste it as a new layer onto your canvas, re-size it and move it to the top of your frame.
Open up the fairy dust element copy and paste that as a new layer onto your canvas re-size it and place it so its inside the frame where the tube and paper layers are.
Next I used the emo cake and plain cupcake elements re-sized them and arrange them to the bottom left of the frame.
I used a different cupcake and the heart stem 3 element from the kit re-sized them and arranged them to the bottom right of the frame.
Copy and paste your tube as a new layer re-size and arrange to your liking, add a drop shadow.
Mine was
H 2
V 2
Opacity 60
Blur 4.00
Color Black
Open up another paper from the kit I used paper 7 copy and paste it as a new layer onto your canvas and move it below everything. Apply your mask and merge group. If it is not showing how you'd like around the edges what I do is move that layer to the top then arrange it and move it back down then duplicate it and mirror it or flip it so it does.
Add your name in your font and color of choice then go to selections-select all-float-defloat-modify and expand by 2 add a new layer flood fill it with white or a color of choice then add some noise by going to adjust-add/remove noise-add noise random checked, 36% noise and monochrome checked. DO NOT deslect yet go to modify and expand by 2 again add a new layer and flood fill with the color you used for your name move it below all the name layers and add a drop shadow. Same drop shadow settings as above.
Now go through and add the drop shadow I stated earlier to everything except the LOVE word-art and the tube in the frame, and of course your full tube since we already did that.
Finally add your copyright and license number if applicable save as png or jpeg whichever you prefer and we're done!
I hope you enjoyed this tutorial and found it easy to follow.
I would LOVE to see your results to any tutorials that you do, you can email results to me or post them on my page on face-book if you have a face-book account.
This tutorial was written by Brunette on August 21st 2012.
Any similarity to any other tutorial is purely coincidental.
Do not copy and paste my tutorials or claim as your own you may link to them for group challenges.
What you'll need:
You'll need a tube of choice I am using a gorgeous tube by Wendy Gerber.
A gorgeous kit by GrnIz Dezinez called My Sweet Cupcake. Which you can purchase HERE as a collab with the tubes by Wendy Gerber or HERE alone as just the kit.
Mask of choice - mine is by Tonya from Creative Misfits HERE.
I used mask number 2 :)
Make sure you leave some love when you download!
Fonts of choice - I am using a pixel font for the copyright and A&S Black Swan for the name.
Ready?
Let's get started!
Open up a 700x700 canvas we can always re-size/crop later.
I like my tags BIG LOL.
Open up ribbon frame two from the kit copy and paste it as a new layer onto you canvas re-size it so it fits nicely. Now take your magic wand and click inside the frame and go to selections-modify-expand by 3 now open up a paper of choice I used paper 9 copy and paste it as a new layer then go to selections-invert and hit delete. DO NOT deslect it yet. Open up your tube preferably a close up copy and paste it as a new layer and arrange it to your liking then hit delete. Open up another paper I used paper 2 from the kit copy and paste this as a new layer re-size and arrange to your liking then hit delete. Now you can deselect. Leave the bottom paper as it is change the blend mode of your tube layer to screen and duplicate it. Then change the blend mode of the top paper layer to screen.
Now we're gonna have some fun with the elements from the kit! YAY!
Open up the LOVE word-art element copy and paste it as a new layer onto your canvas, re-size it and move it to the top of your frame.
Open up the fairy dust element copy and paste that as a new layer onto your canvas re-size it and place it so its inside the frame where the tube and paper layers are.
Next I used the emo cake and plain cupcake elements re-sized them and arrange them to the bottom left of the frame.
I used a different cupcake and the heart stem 3 element from the kit re-sized them and arranged them to the bottom right of the frame.
Copy and paste your tube as a new layer re-size and arrange to your liking, add a drop shadow.
Mine was
H 2
V 2
Opacity 60
Blur 4.00
Color Black
Open up another paper from the kit I used paper 7 copy and paste it as a new layer onto your canvas and move it below everything. Apply your mask and merge group. If it is not showing how you'd like around the edges what I do is move that layer to the top then arrange it and move it back down then duplicate it and mirror it or flip it so it does.
Add your name in your font and color of choice then go to selections-select all-float-defloat-modify and expand by 2 add a new layer flood fill it with white or a color of choice then add some noise by going to adjust-add/remove noise-add noise random checked, 36% noise and monochrome checked. DO NOT deslect yet go to modify and expand by 2 again add a new layer and flood fill with the color you used for your name move it below all the name layers and add a drop shadow. Same drop shadow settings as above.
Now go through and add the drop shadow I stated earlier to everything except the LOVE word-art and the tube in the frame, and of course your full tube since we already did that.
Finally add your copyright and license number if applicable save as png or jpeg whichever you prefer and we're done!
I hope you enjoyed this tutorial and found it easy to follow.
I would LOVE to see your results to any tutorials that you do, you can email results to me or post them on my page on face-book if you have a face-book account.
Sweet Cupcake - Forum Banner
*Click the tag for full view*
This tutorial was written by Brunette on August 21st 2012.
Any similarity to any other tutorial is purely coincidental.
Do not copy and paste my tutorials or claim as your own you may link to them for group challenges.
What you'll need:
You'll need a tube of choice I am using an gorgeous tube by Wendy Gerber.
This tutorial was written by Brunette on August 21st 2012.
Any similarity to any other tutorial is purely coincidental.
Do not copy and paste my tutorials or claim as your own you may link to them for group challenges.
What you'll need:
You'll need a tube of choice I am using an gorgeous tube by Wendy Gerber.
A gorgeous kit by GrnIz Dezinez called My Sweet Cupcake. Which you can purchase HERE as a collab with the tubes by Wendy Gerber or HERE alone as just the kit.
Fonts of choice - I am using a pixel font for the copyright and Clipper Script for the name.
Ready?
Let's get started!
Open up a 650x250 canvas
Add a new layer and made a foreground/background gradient using two colors from your tube. Your angle in the settings should be 36 and repeats set on 3 Linear style. Now flood fill your layer.
Open up your tube if it comes with a close up great if not just use your regular tube. Change the blend mode to Luminance L.
Open up a paper of choice I used paper 2 from the kit copy and paste it as a new layer re-size and arrange it to your liking then change the blend mode to screen.
Open up another paper of choice I used paper 14 from the kit copy and paste it as a new layer re-size and arrange to your liking. I moved mine so it was all the way to one side and the middle was empty then duplicated it and mirrored it, merged them together and changed the blend mode to soft light and lowered the opacity to 53.
Open up one of the starspray elements from the kit copy and paste it as a new layer arrange it to your liking again I moved mine to the far side of the canvas then duplicated and mirrored it.
Open up the fairy dust copy and paste it as a new layer arrange it to your liking and do the same as the above steps duplicate and mirror.
Now we can copy and paste our tube re-size and arrange it to your liking duplicate it and change the blend mode to screen then go to adjust-blur-gaussian blur and set it to 3.
Now we're going to do the borders. Go to the very bottom layer of your canvas it should be blank click it then go to selections-modify-contract by 4 then invert add a new layer flood fill with a color of choice then add some noise if you like. Arrange this layer so its at the top of your layers. Repeat these steps but change the number you contract by to 2.
Add your name in your font and color of choice then go to selections-select all-float-defloat-modify and expand by 2 add a new layer flood fill it with white or a color of choice then add some noise by going to adjust-add/remove noise-add noise uniform checked, 35% noise and monochrome checked. DO NOT deslect yet go to modify and expand by 2 again add a new layer and flood fill with the color you used for your name move it below all the name layers and add a drop shadow.
Here are the settings I used
H 2
V 2
Opacity 60
Blur 4.00
Color Black
Finally add your copyright and license number if applicable save as png or jpeg whichever you prefer and we're done!
I hope you enjoyed this tutorial and found it easy to follow.
I would LOVE to see your results to any tutorials that you do, you can email results to me or post them on my page on facebook if you have a facebook account.
Thursday, August 16, 2012
Musical Edge
*Click the tag for full view*
This tutorial was written by Brunette on August 16th 2012.
Any similarity to any other tutorial is purely coincidental.
Do not copy and paste my tutorials or claim as your own you may link to them for group challenges.
What you'll need:
You'll need a tube of choice I am using a gorgeous tube by Arthur Crowe which you can purchase at his store HERE.
Be sure to check out all the other great tubes he has there!
A rockin kit by Lexi's Creationz called Metal Edge which you can find out where to purchase on her blog HERE.
Be sure to check out ALL her other awesome kits!
Fonts of choice - I am using a pixel font for the copyright and Gang Wolfik for the name.
Mask of choice - mine is by Tonya from Creative Misfits HERE.
I used mask number 2 :)
Make sure you leave some love when you download!
Ready?
Let's get started!
Open up a 700x700 canvas we can always re-size/crop later.
I like my tags BIG LOL.
Open up the star frame from the kit copy and paste it as a new layer onto your canvas re-size it to fit nicely. Then take your magic wand and click inside the frame then go to selections-modify and expand by 3 then open up a paper of choice I used paper 5 add a new layer then paste the paper INTO the selection. Open up your tube copy and paste the mirrored version in there then go to selections-invert and hit delete. Open up another paper of choice I used paper 3 before you copy it into the frame go back up to selections-invert now add a new layer and paste this paper into the selection, change the blend mode of this paper layer to overlay. Gray scale your tube layer in the frame and change the blend mode to Luminance L duplicate your tube and change the blend mode to soft light for that layer. Duplicate your first paper layer and move it above the other paper layer and change the blend mode to screen.
On the frame layer go to selections-select all-float-defloat-modify and expand by 3 add a new layer and flood fill with a color of choice I used a foregroun/background gradient. Now add some noise I used Adjust-add/remove noise-add noise my settings are Random checked, Monochrome checked and at 36%. Add a drop shadow H 2 V 2 Opacity 60 Blur 4.00 Color Black.
Open up the disco ball from the kit copy and paste it as a new layer re-size it to fit nicely and move it below the star frame. Arrange it to your liking.
Open up the keyboard copy and paste it as a new layer re-size it so it fits nicely and move it to the bottom of your frame.
Open up the zipper flower and the purple bottle copy and paste them as new layers re-size them so they fit nicely and arrange them to your liking.
Now for the tube Arthur is awesome at giving you different hair colors to work with and such so with mine what I did was had the pink hair layer and purple hair layer hide then changed the blend mode of the pink layer to overlay. Now we can copy and paste your tube as a new layer duplicate it change the blend mode to soft light then go to add a guassian blur of 3 this is under the adjust in psp then lower the opacity to 28.
Now go through and add a drop shadow to everything include your BOTTOM tube layer not your duplicated one. I used the same settings as earlier H 2 V 2 Opacity 60 Blur 4.00 Color Black.
Open up your paper of choice I used paper 7 from the kit copy and paste it as a new layer move it below everything then add your mask and merge group. Then add some noise same settings I used below for the font.
Add your name in your font and color of choice then go to selections-select all-float-defloat-modify and expand by 2 add a new layer flood fill it with white or a color of choice then add some noise by going to adjust-add/remove noise-add noise random checked, 36% noise and monochrome checked. DO NOT deslect yet go to modify and expand by 2 again add a new layer and flood fill with the color you used for your name move it below all the name layers and add a drop shadow.
Finally add your copyright and license number if applicable save as png or jpeg whichever you prefer and we're done!
I hope you enjoyed this tutorial and found it easy to follow.
I would LOVE to see your results to any tutorials that you do, you can email results to me or post them on my page on face-book if you have a face-book account.
Move That Body
*Click the tag for full view*
This tutorial was written by Brunette on August 16th 2012.
Any similarity to any other tutorial is purely coincidental.
Do not copy and paste my tutorials or claim as your own you may link to them for group challenges.
What you'll need:
You'll need a tube of choice I am using a gorgeous tube by Wendy Gerber which you can purchase at her store HERE.
Be sure to check out all the other great tubes her and other artists have there!
A rockin kit by Amy Marie called Move that body 1 which you can purchase HERE.
Be sure to check out ALL her other awesome kits!
Fonts of choice - I am using a pixel font for the copyright and Battlelines for the name.
Mask of choice - mine is by Tonya from Creative Misfits HERE.
I used mask number 2 :)
Make sure you leave some love when you download!
This tutorial was written by Brunette on August 16th 2012.
Any similarity to any other tutorial is purely coincidental.
Do not copy and paste my tutorials or claim as your own you may link to them for group challenges.
What you'll need:
You'll need a tube of choice I am using a gorgeous tube by Wendy Gerber which you can purchase at her store HERE.
Be sure to check out all the other great tubes her and other artists have there!
A rockin kit by Amy Marie called Move that body 1 which you can purchase HERE.
Be sure to check out ALL her other awesome kits!
Fonts of choice - I am using a pixel font for the copyright and Battlelines for the name.
Mask of choice - mine is by Tonya from Creative Misfits HERE.
I used mask number 2 :)
Make sure you leave some love when you download!
MuRa's Meister Copies
Eye Candy 4000 - Gradient Glow
Ready?
Let's get started!
Open up a 700x700 canvas we can always re-size/crop later.
I like my tags BIG LOL.
Open up frame 2 from the kit copy and paste it as a new layer onto your canvas re-size it so it fits nicely. Open up a paper of choice I used paper 6 copy and paste it as a new layer below your frame and add your mask then merge group. Now with your pixel font type out some words I used Move that body then before you convert it to raster layer make sure its in the center of the canvas. Then go to MuRa's Meister Copies and use these settings shown below. My screen-shot shows the color black but I used white you can use whatever color you'd like. Now once you get that done apply your mask again then merge group. Change the blend mode of this layer to Luminance L duplicate it.
Open up disco ball 3 from the kit copy and paste it as a new layer onto your canvas re-size it so it fits nicely. Arrange it to your liking.
Open up the cityscape copy and paste it as a new layer re-size it so it fits nicely and place it near the bottom part of your frame.
Next open up the speaker 2 element copy and paste it as a new layer re-size it and arrange it to either sid of your tag then duplicate it and arrange it on the other side.
Now we can copy and paste your tube as a new layer re-size it if you need to arrange it to your liking then duplicate it change the blend mode to screen then go to adjust-blur-gauassian blur set to 3 and lower the opacity to 28.
I used lights two behind the speakers re-sized them and flipped them so it looks like they're shining on the tube.
Open up keys 2 from the kit re-size and arrange to your liking I used a half tube so I put it at the bottom of the tube.
I also used the car and dice elements from the kit again re-sizing them so they fit nicely and arranging them on either side of the tag.
Now go through and add a drop shadow to everything except the mask and masked word layers. On your tube layer you're going to add the drop shadow to the BOTTOM layer not the duplicated one. These are my settings H 2 V 2 Opacity 60 Blur 4.00 Color Black.
Add your name in a font and color of choice then add a gradient glow my settings shown in the screen-shot below, then add the same drop shadow as earlier. Then I moved the name up around where the tube was in the middle and changed the blend mode to Luminance L.
Finally add your copyright and license number if applicable save as png or jpeg whichever you prefer and we're done!
I hope you enjoyed this tutorial and found it easy to follow.
I would LOVE to see your results to any tutorials that you do, you can email results to me or post them on my page on face-book if you have a face-book account.
Monday, August 13, 2012
Valentine Arrows
*Click the tag for full view*
This tutorial was written by Brunette on August 13th 2012.
Any similarity to any other tutorial is purely coincidental.
Do not copy and paste my tutorials or claim as your own you may link to them for group challenges.
What you'll need:
You'll need a tube of choice I am using a gorgeous tube by Industrial Aardvark which you can purchase at The PSP Project HERE.
Be sure to check out all the other great artists there!
A cute kit by Wicked Princess Scraps called Valentine Arrows which you can purchase HERE.
This is an exclusive kit to that store and it matches the tube I used!
Fonts of choice - I am using a pixel font for the copyright and Carpenter ICG for the name.
Mask of choice - mine is by Chas from Creative Misfits HERE.
I used mask number 39 :)
Make sure you leave some love when you download!
This tutorial was written by Brunette on August 13th 2012.
Any similarity to any other tutorial is purely coincidental.
Do not copy and paste my tutorials or claim as your own you may link to them for group challenges.
What you'll need:
You'll need a tube of choice I am using a gorgeous tube by Industrial Aardvark which you can purchase at The PSP Project HERE.
Be sure to check out all the other great artists there!
A cute kit by Wicked Princess Scraps called Valentine Arrows which you can purchase HERE.
This is an exclusive kit to that store and it matches the tube I used!
Fonts of choice - I am using a pixel font for the copyright and Carpenter ICG for the name.
Mask of choice - mine is by Chas from Creative Misfits HERE.
I used mask number 39 :)
Make sure you leave some love when you download!
Eye Candy 4000 - Gradient Glow
Ready?
Let's get started!
Open up a 700x700 canvas we can always re-size/crop later.
I like my tags BIG LOL.
Open up frame 2 from the kit copy and paste it as a new layer onto your canvas.
Open up a paper of choice I used paper 3 from the kit copy and paste it as a new layer onto your canvas below your frame layer. Now use your eraser tool to erase what is outside the frame. Take your tube mine came with a closeup copy and paste it as a new layer above the paper and use your eraser tool like you did for the paper. Gray scale your tube layer and change the blend mode to screen.
Now go back to your frame layer go to selections-select all-float-defloat-modify-expand by 3 add a new layer and flood fill with a color of choice then add some noise in psp go to Adjust-add/remove noise-add noise my settings are Random checked, Monochrome checked and at 36%. Add a drop shadow these are my settings
H 2
V 2
Opacity 60
Blur 4.00
Color Black
Open up the mess element from the kit copy and paste it as a new layer onto your canvas re-size it a little if you need to and move it below the frame layer. Arrange it so its sticking out at the top slighty then duplicate, mirror and flip it.
I used the metal studs on the frame itself, re-size them so they fit. They should fit just right on the frame.
I also used the cake and the two cucakes on the bottom right side of the frame. Re-size them so they fit there nicely.
I added the cane element from the kit re-sized it so it fit nicely mirrored and put it on the bottom left corner of the frame.
Copy and paste your tube as a new layer arrange it to your liking and add the same drop shadow as you did earlier.
Now open up a paper of choice I used paper 9 copy and paste it as a new layer onto your canvas arrange it so its below everything. Then add your mask and merge group. Arrange your mask layer to your liking I added some noise to this layer using the same settings stated earlier.
Add your name in your font and color of choice then add some noise I used the same settings as earlier. Then add your gradient glow settings that I used are shown in the screen shot below.
Finally add your copyright and license number if applicable save as png or jpeg whichever you prefer and we're done!
I hope you enjoyed this tutorial and found it easy to follow.
I would LOVE to see your results to any tutorials that you do, you can email results to me or post them on my page on face-book if you have a face-book account.
Subscribe to:
Posts (Atom)
